User Guides For Direct Buyers

Heads Up Hockey Installation Guide

Heads Up Hockey App Installation Instructions

For Online Purchases:

If you purchased our product from our online store, please follow the installation instructions below(this page):

For Retail Purchases (Pure Hockey Stores Only):

If you purchased a Heads Up Hockey unit from Pure Hockey, please follow these unique instructions at the link below:

For Other Purchases:

If you purchased a Heads Up Hockey unit from any other location, please follow the link below:

Online Purchase Install Instructions

App Install Guide

STEP 1:

Open the App Store

On your device, go to the iOS App Store. Make sure to open the device as normal

STEP 2:

Download the App

Search for HeadsUpHockeyApp in the store and tap Download to install the app on your device.

STEP 3:

Check Your Email or Text for Activation Code

You will receive an activation code via email or text message from info@vinceresystems.com.

Be sure to check your spam or junk folder if you do not see the email.

STEP 4

Enter the Activation Code

Open the app and enter the activation code that was sent to you.

Once the code is verified, you will gain access to the app.

STEP 5

Create an Account

You’ll now need to create an account in the app. This account is separate from your Shopify account.

You can create an unlimited number of accounts, but you can only have the app installed on two devices at a time.

STEP 6

Log In

After creating your account, log in using your new username and password.

STEP 7

Switching Accounts

To switch between accounts, tap the Logout button in the top right corner of the screen.

STEP 8

De-register an Activation Code

If you want to use the app on another device, you can de-register your activation code.

To do this, tap Deactivate at the bottom of the screen, where your activation code will be displayed.

Gen 2.0 Clip Instructions

Gen 2 Clip Guide

Step 1

Organize Your Parts

Lay out all the components. You should have 6 parts:

  • Screw and nut
  • iPhone base
  • Snapfit
  • Logo mirror plate
  • iPad base
  • Mirror and rail

If the clip is already attached to the rail, skip to Step 4.

Step 2

Assemble the Logo Mirror Plate

Insert the nut into the logo mirror plate.

Attach the plate to the rail by sliding it in.

Screw the nut into the bolt, but leave it slightly loose so you can adjust the plate’s position on the rail.

Step 3

Attach the Snapfit to the iPad Base

Squeeze the two corners of the snapfit and insert them into the hole on the iPad base.

Push until you hear and see a snap. The snapfit should now be securely connected to the iPad base.

Step 4

Attach the iPhone Base to the Clip

Slide the iPhone base onto the bottom of the iPhone clip.

Locate the slotted hole on the rail, which should have a bubble at one end.

Slide the rail into the slotted hole, ensuring it is securely attached.

Step 5

 Attach the iPad Base to the Clip

Insert the clip into the iPad base by placing the edge over the open bottom of the iPad hole.

Rotate the bottom slot until it locks into place.

When using your iPad, attach the rail as shown in the video.

Step 6

Secure the iPad Faceplate to the Stand

Attach the iPad faceplate to the stand.

Tighten it using the round knob on the back.

Insert your device and adjust the mirror and rail so that the app has a clear view of the ground.

Step7

Mobile Use

Follow the same steps for the iPhone clip
Attach the rail and insert the mobile faceplate into the stand. Adjust as needed. We Hope You Enjoy the HUH App

Stand + Calibration Instructions + Settings

Below are the stand and Calibration Instructions

Stand + Calibration Instructions + Settings

STEP 1

Construct Stand

Locate the five parts of the Heads Up Hockey stand and screw the pieces together. The video above shows how to combine the parts in the proper order.

Step 2

Calibrate Device

Make sure that your device is calibrated. You should be prompted to calibrate the device when you first open the app. This is done to take accurate distance measurements and properly calculate scores for all players. The app will explain how to perform calibration. Rotate the device as instructed. This popup will re-appear if the IPad gets out of alighnment during gameplay, you will not need to return to the calibration screen unless in a game-mode

STEP 3

Settings/Performance

For optimal performance of the Heads Up Hockey App, we recommend selecting Xenopucks when using any black or grey-colored puck. Ensure there is contrast between your floor and the puck for better tracking. If you're playing on a grey surface, we suggest using the Green Biscuit puck for the best results. Additionally, we recommend using the larger playspace option. You can find the settings control in the top right of the app.

App Usage Instructions